KUHN Planter seeders, as well as any agricultural machinery from MIG LLC, can be leased with delivery to the regions, a guarantee of at least a year. Seeders KUHN Planter, as well as any agricultural machinery from MIG LLC is possible on lease with delivery to the regions,

Frame: one-piece, telescopic or folding
- one-piece frame: 2, 50 m, 3, 00 m, 3, 45 m, 4, 40 m, 6, 00 m, 9, 00
- telescopic frame: 4, 4 m - working width (3 m / 3, 25 m - transport)
- folding frame: 6 m - working width (3 m - transport)

Precision seeding and a low (less than 10 cm) seed drop point are the main strengths of the KUHN Planter 3, ensuring the exact position of each seed in the row.
The seeding units are available in various designs to adapt to any working conditions. The fertilizer application system is a reel with a metering groove for each row. It is possible to install polyethylene bunkers 2x190 liters, 2x260 liters, 950 liters and 1350 liters, which will allow you to select the capacity and performance for the given conditions. A front mounted fertilizer hopper is also available.
The capacity of the seed hoppers is 47 liters each, the row spacing is from 25 cm. The pneumatic micro-granulator can apply insecticides, anti-slugs, herbicides or granules. Control units KMS208 and KMS412 allow you to monitor the seeding. If it is necessary to disable seeding in a row, manually or automatically, the KMD112 unit can be used.

Precise sowing at the same depth - even sowing thanks to pneumatic distribution of the low seeding disc - uncoupling when overloading - the coulter arrangement accelerates the growing season - different seeding units for all working conditions and practically all types of seeds (support on the rear (covering) roller, balancer, opening wheels) - one-piece frame.
Frame: one-piece, telescopic or folding - one-piece frame: 2.50 m, 3.00 m, 3.45 m, 4.40 m, 6.00 m, 9.00 - telescopic frame: 4.4 m - working width (3 m / 3.25 m - transport) - folding frame: 6 m - working width (3 m - transport)
Hitch: semi-automatic hitch category 2 (except for machines equipped with a fertilizer hopper)
Markers: - Mechanical control on models with 2.50 m and 3.00 m working width - Hydraulic control (double-acting valves) on models with working widths less than 3.45 m (2 valves required) - Hydraulic control on models with telescopic or folding frame as standard (2 directional valves required)
Markers for working in the center of the tractor: - on request for solid 6 m frames - standard on 9.00 m frames.
Drive wheels 5x15 or 6.5x15 (depending on the model): - 2 pcs. on frames from 2.50 m to 4.40 m - 4 pcs. on frames 6.00 m - 6 pcs. on frames 9.00 m
Dosing by means of a 20-speed gearbox: - 1 gearbox for seeders up to 12 rows, 2 boxes from 13 rows - 2 boxes on 9.00 m frames - 3 boxes on folding frames
Turbine (vacuum / discharge): - PTO drive 540 rpm. by means of a cardan shaft (1,3 / 8 6-splines as standard, without overrunning clutch) Planter 2: - Vacuum: vacuum channel + 18 outlets with individual hoses (guarantee of uniform vacuum along the entire length of the drill); - Discharge: 9 outlets for micro granulator (micro granulator: on request)
Fertilizer applicator (optional): - 2 hoppers with a capacity of 160 liters on models with a frame length of 2.50 and 3.00 m - 2 hoppers with a capacity of 240 liters on models with a frame length of 3.45 m (6 rows) and 4, 40 m - 1 hopper with a capacity of 160 l and 1 hopper with a capacity of 240 l on models with a 3.45 m frame (5 rows) - 4 hoppers with a capacity of 160 l on models with a 6.00 m frame 25 l seed hoppers (optional hoppers with a capacity of 45 liters).
Seeding units: - "Rear depth gauge" (for deep seeding): adjustment of the seeding depth with the rear press roller - "Balancer" (for high sowing precision on well prepared soil): adjustment of the seeding depth with the front wheel and rear press roller (pendulum module) - "Opening discs" (for seeding in non-uniform conditions): adjustment of the seeding depth by means of opening discs with depth control wheels and the rear press roller.
Precise seeding at the same depth - the same distance between seeds due to the low position of the seeding disc - the arrangement of the coulters accelerates the growing season - seeding modules for all sowing conditions and different types of seeds (support on the rear (covering) roller, balance beam, opening discs) - one-piece, telescopic or folding frame - manual or hydraulically operated markers - fertilization from integrated or front hopper - non-clogging micro granule applicator.
All types of planter frames are made of robust steel "H" profiles. This shape of the frame provides easy, with the help of a conventional bracket, fastening of all main (seeding modules, drive wheels, drive mechanisms, turbine) and additional (devices for applying fertilizers and pesticides) elements of the seeder, both in the front and in the rear of the frame.
The pneumatic seeding device of the PLANTER seeder allows you to sow with high precision, providing the specified distance between the spacing in the row. The Planter seeder is used for sowing crops with a row spacing of more than 25 centimeters: beets, corn, beans, rapeseed, peas, sunflowers, etc. The seeding device of the PLANTER seeder is the result of many years of development, experience and experimentation. The sowing depth is adjusted by the rear press roller, a solution adapted for deep seeding and has proven its worth. The rear roller and front wheel are linked, which allows for flawless tracking of the terrain and ensures high accuracy of seeding in depth. For sowing in non-uniform conditions. Dropping seeds very close to the soil and the presence of a coulter allows sowing with high precision, both in depth and along the seeding line.

Seed picking and dumping takes place inside a sturdy aluminum crankcase. It has been a guarantee of seeding accuracy for many years. The grabbing of the seeds by the stainless spreading disc is ensured by suction. The seed pick-up system consists of a disc corresponding to each specific crop and a pick-up adjustment device. This intake device excludes the capture of two seeds at once, without interfering with the suction process. The seeds coming from the hopper are poured into the crankcase, into the lower part of the selection chamber, where they are sucked one by one into each perforation of the disc. At the lowest point, which is in the immediate vicinity of the bottom of the furrow, the suction process stops, releasing the seed one by one. The mechanical ejector ensures that the seed is thrown at the same distance for sowing with impeccable precision. The two-sensor control device allows you to monitor the current sowing rate on each seed unit.

Planter 2 is equipped with a double-acting turbine (vacuum and discharge) with 18 outlets in the vacuum channel. The one-piece vacuum channel ensures a uniform vacuum along the entire length of the drill, regardless of the distance to the turbine. The seeding units can be connected to the vacuum channel every 25 cm, thus avoiding too long or too short hoses. The turbine of the PLANTER 2 seeder is able to maintain a vacuum on 18 seeding modules simultaneously and at the same time provide three devices for applying granular pesticides with compressed air.

The folding planter provides a 3 meter road clearance. The seeder frame consists of three independent parts, which allows perfect following the field surface and reaching good results when sowing. 4 rear wheels and 3 independent (on each section) gearboxes allow using the seeder on any soil. Sowing with one, two or three sections of the seeder is possible. In combination with the central hopper, it is the ideal tool for large areas.

Designed for sowing crops with a row spacing of more than 25 cm: beets, corn, beans, rapeseed, peas, sunflowers, etc.

• Precise sowing at the same depth.
• Uniform seed spacing due to low sowing disc position.
• Disconnection in case of overloads.
• Various seeding modules for all working conditions and practically all types of seeds (support on the rear (covering) roller, balancer, opening discs).
• Folding frame.
• Fertilization from the front or integrated hopper.
• Pneumatic application of micro-granules without the risk of clogging.
• Electronic control devices (optional): Hector 3000, KMS 208, KMS 412 or KMD 112.

The drive shaft rests entirely on ball bearings. The change in the distance between the rows is set thanks to the telescopic hexagonal drive shaft.

Three types of seeding devices:
• Universal sowing unit: support on the rear roller. Adjustment of the seeding depth with the rear press roller. This solution is adapted for deep seeding (corn, sunflower).
• Balancer: front wheel + rear roller. The rear roller and front wheel are linked to track the terrain and ensure accurate seeding at depth (beets, beans).
• Cutting discs with a coulter and wheels for indicating the planting depth. For sowing in non-uniform conditions. Dumping seeds very close to the soil and the presence of a coulter allows you to sow seeds with high precision, both at depth and along the sowing line.

There are five types of rear rollers to choose from to suit different requirements.
• V-shaped, cast steel with teeth.
• V-shaped, plain cast steel.
• V-shaped, rubber.
• Otiflex with scrapers with a diameter of 370 or 500 mm.

All types of precision planter frames are made of steel H-profile, on which all the main and additional elements of the seeder are located.

The frame is telescopic. Transport width 3 or 3.25 m depending on equipment and design (working width 4.40 m).

The frame is not folding. One-piece frame from 3.00 to 9.00 m.

The frame is folding. With this machine you can sow 8 rows of maize with a row spacing of 75 or 80 cm or 12 rows of beets with a row spacing of 45 or 50 cm. Transport widths from 3.00 m. Various designs are available.

The front hopper is hung on the front lift of the tractor and can apply fertilizers from 40 kg / ha to 400 kg / ha. It can be combined with 6-, 8- or 12-row precision planters or Kuhn Planter II with fertilization equipment and can be used for grain sowing in combination with seeding units. The capacity of the hopper is 750 liters, additional sides increase the volume by another 400 liters. In this case, the loading height is respectively 1.15 or 1.23 m. The weight of the hopper is 350 kg. Dosing is carried out by the "Venta" system.

Fertilization: stainless steel hopper (800 mm wide with 2 or 3 outlets -160 l or 1200 mm wide with 3 or 4 outlets - 240 l). Fertilizer metering takes place thanks to the distribution through a specially treated auger. The removable stainless steel bottom makes disassembly quick and easy, allowing you to completely empty the hopper. Fertilization takes place through the coulter or through the disc coulter. Both systems are equipped with a non-stop safety system "Non-Stop".

Three possibilities for adding pellets:
• Through a separate herbicide nozzle per row behind the rear roller.
• Through a sludge diffuser between the share and the rear roller.
• Through an insecticidal descent tube inside the opener.

Control device. Activates an acoustic and optical signal in the tractor cab in case of cutting the safety bolt of the seeding unit. This device, installed as standard, can be supplemented with a mechanical hectare counter.

Hector 3000. Replaces the control device, as well as the mechanical counter. It informs the user about the following data:
• speed of advance;
• daily and total hectare counter;
• warns the driver with a sound and optical signal that the seeding module bolt protection has been cut;

Electronic control device Controlor. Information:
• Counting the number of seeds per hectare in thousands of units on each seeding module;
• Sowing speed in km / h;
• Hectare counter;
• Distance covered in km;
• Hourly production counter;
• Time counter;

Remote shutdown of modules (on request). By means of a remote control, it is possible to disconnect the rows from the cab using the Controlor system. An additional block allows you to monitor the status of each module.

Fertilization:
• For model II 300 with folding frame, only possible with front hopper and only on separate chassis.
• For models II 300 and Junior 250 with non-folding frame available with 4 or 6 rows.
• For model II 345 it is possible with 5 or 6 rows.
• For model II 440 it is possible with 5, 6, 7 or 8 rows.
• Possible on all models II 600 and II 900 with non-folding frame.
• For models II 300 and Junior 300 with telescopic frame possible with 6 rows.
• For models II 325 and Junior 325 with telescopic frames available with 6 or 8 rows.

The micro-granule spreader allows all seeders to be used for the application of insecticides, anti-slugs, herbicides.

Folding markers:
• On models II 300 with folding frame and II 600, II 900 with non-folding frame, the track markers are folded hydraulically using a double-acting hydraulic valve.
• On models II 300, Junior 250 with non-folding frame, the track markers can be folded mechanically or hydraulically using a single-acting hydraulic valve.
• On models II 345, II 440, Junior 300 and Junior 325, the track markers are folded hydraulically using a single-acting hydraulic valve.
• On models II 300, II 325 with a telescopic frame, the track markers are folded hydraulically using a single-acting hydraulic valve (sequential valve on request).